#The disk is write protected software#
#The disk is write protected Pc#
#The disk is write protected windows#

Type вЂњSelect disk #вЂќ, where вЂњ#вЂќ is the disk number.Compare it to the вЂњSizeвЂќ column, and youвЂ™ll find out the disk number. This step is where youвЂ™ll need the capacity information to identify your USB device. YouвЂ™ll see a list of all memory storage disks, named Disk 0, Disk 1, and so on.In Command Prompt, type вЂњdiskpartвЂќ and press вЂњenter.вЂќ Then, type вЂњList diskвЂќ and press вЂњenterвЂќ again.Launch вЂњCommand Prompt.вЂќ You can do this either by pressing вЂњWindows key+RвЂќ and typing вЂњCMDвЂќ or searching for Command Prompt from the вЂњStart Menu.вЂќ If you see the вЂњAccess is deniedвЂќ message, right-click on Command Prompt and choose вЂњRun as Administrator.вЂќ.After youвЂ™ve confirmed the space limit, plug the USB stick into the computer port. First of all, check and remember (or write down) the storage capacity of the USB device.To remove write protection using Diskpart, follow these steps: Use Diskpart to Disable Write ProtectionДiskpart is a command tool that lets you manage all storage units that get detected by the computer. All you need to do now is click on the protected USB drive and select вЂњTurn Off BitLocker.вЂќ The status shows that the device is getting decrypted and, upon completion, BitLocker is turned off.ДЄfter youвЂ™ve disabled BitLocker, try to copy something on the USB stick again and see if the problem got resolved.Right-click on the icon and go to вЂњManage BitLocker.вЂќ This step takes you to the BitLocker Drive Encryption window, where a list of all storage units and their encryption status display.If the icon has a padlock, BitLocker was enabled for the device. Open вЂњFile ExplorerвЂќ and look for the storage device you have in mind.Bitlocker is off by default, but you may have activated it before and forgot about it, or someone else did it.

#The disk is write protected software#

The software primarily gets used for internal drives, but it can also encrypt USB sticks/drives.

#The disk is write protected windows#

Turn Bitlocker Off to Disable Writer ProtectionД®ver since Windows 7, BitLocker has been integrated into the OS to protect your data with encryption. There are several ways to remove write protection from a USB stick if you have a Windows PC. Remove USB Write Protection using Windows If thereвЂ™s no switch (most common), or you still canвЂ™t write to the USB, youвЂ™ll need to employ other methods. If that works, your problem is solved, and all you need to do is ensure the switch doesnвЂ™t accidentally get moved in the wrong position again. Take the USB stick youвЂ™ve tried to write to and look for that switch, usually located on the side, and it might also be labeled as вЂњLockвЂќ or вЂњWrite Protection.вЂќ Switch it to the other position, reinsert it, and then transfer data to the memory stick again. Some data storage units have a physical switch for toggling write protection on or off. A Universal SolutionД«efore we go into details about write protection removal in different operating systems, thereвЂ™s one thing to check first. ThereвЂ™s even a solution if youвЂ™re working on a Chromebook.

#The disk is write protected Pc#

Luckily, there are quick and easy methods to solve the write protection issue, whether youвЂ™re on a Windows PC or a Mac. If the problem of write protection has occurred on a Transcend flash drive try to use a special tool JetFlash Recovery that allows to check the status of the file system on a flash drive and fix all errors, including вЂњThe disk is write protectedвЂќ.Failed write attempts can be quite an inconvenience on a USB stick. In this case you can use special tools to recover the file system or just format the flash drive. The error вЂњThe disk is write protectedвЂќ may point to the corruption of the file system on your USB device. If your computer is a part of Active Directory domain, the ability to write to the USB devices may be disabled using GPO by your system administrator.

Exit Diskpart and make sure that the write protection error does not appear when writing files to the disk.

The entries Current Read-only State : Yes and Read-only : Yes indicates that read only attribute is set for the disk.

Check the current disk attributes: attributes disk In our case, the result of the command is:.

See the System Event Log for more informationвЂќ appears, it is more likely that the USB drive is damaged and you wonвЂ™t be able to do anything with it using software methods. If the error вЂњ DiskPart has encountered an error: The request could not be performed because of an I/O device error.